Spyder-Net - Automotive Classifieds & Performance Parts: Exotic Mods Products, DOTZ, AEZ, REMUS

Please Click On The Images For A Bigger View

Dynamic Performance Engineering (DPE), based in Southern California, prides itself in manufacturing original products that are track proven and performance driven. With years of experience and knowledge gained in the aftermarket community, DPE has fused, performance, functionality and design to bring serious auto enthusiasts with the utmost quality in products and customer service.

DPE Forged Custom wheel line utilizes the highest quality forged T6-6061 aircraft aluminum in the manufacturing process to ensure each wheel is lightweight while maintaining stringent structural integrity specifications. R&D followed by Computer Aided Design (CAD) is used to create digital models in order to build prototypes, which are then rigorously tested at individual labs to exceed the standards set by the Department of Transportation (DOT):

DPE stresses high quality products, but more importantly the customer service behind it. With that in mind, dealer selection is the key. To the customer, their interaction with DPE is through our dealer network. This is why DPE strives to buil long-lasting relationships with each dealer to ensure that they maintain the high level of customer service that DPE dedicates its business to.

AEZ Leichtmetallräder is one of the few wheel manufacturers on the market to offer super lightweight wheels under the “Lite tec®” name. In 2006 AEZ was the first company to begin serial production of alloy wheels featuring its exclusive Nano tec finish.

AEZ makes quality assurance a high priority. All AEZ wheels undergo numerous tests and are rigorously examined and certified by German TUVs. AEZ’s logistics centre in Siegburg near Cologne has thousands of wheels in stock, ensuring prompt delivery and availability.

High-quality products, innovative ideas and continuously adapting to current trends are also imperative for steady and successful growth. New media play a key role, and here, AEZ has set new standards in this increasingly important area. The introduction of the interactive wheel CD-Rom for both our commercial and end consumers, as well as the wheel configurator on our online wheel configurator have made the brand a pioneer in customer service and innovation.

The AEZ success story is a nutshell is best described as: high-quality products designed with careful attention to detail, manufactured with an eye to perfection and marketed with enthusiasm.

The lifestyle. The brand. When Dotz has a hand in it, think speed, style, expertise and tuning. The company’s background is rooted in a passion for cars and high quality manufactured rims. Dotz’s outstanding product line is topped off with a fast delivery service and Europe-wide distribution.

Dotz was integrated into the Alcar Group, positioned between fellow rim manufacturers AEZ and Enzo, and quickly established itself as a top tuning name. The team based in the Austrian town of Hirtenberg produces racing-oriented wheels for Europe’s speed junkies and auto-modification scene. Accordingly, famous high-speed race circuits such as Brands Hatch or Kyalami have become the ideal namesakes for Dotz’s product range.
Dotz fans can choose from a wide selection of stylish rims that are not only designed for speed, but have also been put to the acid test with regard to their roadworthiness. The German Technical Inspection Authority, TÜV, inspects all wheels produced at the Neuenrade site for driving properties and stability.

"Caractère Automobile" is a Belgian company whose main activity is the design and marketing of body styling equipment for vehicles of marques belonging to the VAG group. Alain Hurard, the founder of the company and a designer by training, has been designing, developing and marketing the products in the "Caractère" range with the aid of his dynamic team since 1992.

"Caractère" products are manufactured in PU RIM from the outset in Germany to ISO 9000, approved by the German TUV in PU RIM. This latter method of manufacture brings a number of advantages, for instance, a very high finish of injection-moulded products, and the rapidity of the rate of production. In addition, the flexibility of the material makes mounting easy, and means that our products are compatible with the new 2005 European standards on pedestrian safety. Once in our production workshops, the body parts are inspected by us and then packaged (with screws and bolts, grilles, adhesive, and mountings) for greater ease of mounting, and then carefully packed for trouble-free shipping.All of our parts come guaranteed against faulty manufacture. Since PU RIM is the fastest manufacturing method, we are able to respond to significant demand levels (capacity to produce up to 25 items per day per mould).

Our new infrastructure, which has been in place since September 2001, was custom-built and equipped specifically for our purposes, and provides us with the best possible working environment. As we have a large storage floor space in our factory we can hold a large amount of stock, covering the entire "Caractère" range (5,000 items, more or less), which allows us to respond to orders without delay. xpect the best from the market leader and prepare for your high expectations to be exceeded. The latest developments in the REMUS Innovation Research Center set future standards. In the following section we offer you a short overview of the facilities of our R&D Department. Every single REMUS product must demonstrate its high performance on the roller type test stand. Only then the product may carry the name REMUS.

Team Spirit, experience, profound technical knowledge, first class equipment with ultra-modern development and production facilities are the basis for REMUS's story of success. The story begins in september 1990 with five employees, One month later in the green countryside of Barnbach, the first spade of truf was turned over for the REMUS building. In a record time of six months a fully functional factory building with integrated development, production, administration and warehousing was set up

Expect the best from the market leader and prepare for your high expectations to be exceeded. The latest developments in the REMUS Innovation Research Center set future standards. In the following section we offer you a short overview of the facilities of our R&D Department. Every single REMUS product must demonstrate its high performance on the roller type test stand. Only then the product may carry the name REMUS.

Sound Tested - tailored to each vehicle
EC Approved (unless noted otherwise)
State-of-the-art Stainless steel and heat resistant black ceramic paint
Easy "Do-it-yourself" bolt-ons for specific exhausts
Made in Austria
In business since 1990
Number 1 exhaust manufacturer in the world
World market leader : 90% export rate, 5 continents - more than 60 countries
Best exhaust manufacturer according to Sport Auto poll
Remus research and development
Motorsports implication : Rally, Formula 3000, Porsche Supercup, Motocross, Superbike, Endurance races
Exhaust manufacturer for OEM companies, Tuners and OE tuning line, see below for complete list.
Highest quality standards

Carbon Products

EXOTIC MODS (EM) Carbon Products, designs and manufactures innovative and exciting products in carbon fiber specially for the Continental marque like BMW, Mercedes and Porsche. Our product line focuses primarily on carbon fiber products designed specifically for your continental vehicle for a perfect fit whether it is interior, exterior trims or full blown carbon bodykits.

High quality and high standards is our main aim and each product is manufactured with that principle in mind and then its inspected by our quality control team before leaving the factory. These products are made with 100% hand-laid Grade "A" carbon fibers and are finished with a high quality clear coat with UV protection.

In addition, these parts have been rain, wind, and heat treated and tested to ensure long lasting durability. Our products are designed to be as light as possible in weight but still retaining it's durability and ensuring safety.

Exotic Mods Carbon products are known for its high quality, great fitment, lightweight, and show quality finish.

TEIN, Inc. is a worldwide company with facilities in Japan, United States, Hong Kong and United Kingdom. Each facility is capable of complete product sales, support, and R&D. We also have exclusive distributors all around the world which not only stock our products but can also perform all after services (repair, overhaul, and revalving). All TEIN lowering springs and coilover are manufactured and assembled in our factory based in Yokohama, Japan.

The company name "TEIN" was named after a combination of the first two letters, "TE"CHNICAL "IN"NOVATION, as it has been our principle to provide the best products supported by our state of the art technology since we started our business.

What sets TEIN apart from other competitors is our dedication to suspension components. TEIN develops specific product specifications for the different regions based on consumer demands, road conditions, and vehicle specification. This means that our consumers get the best possible product for where they live, and how they drive. Each of our facilities performs R&D and test fitment locally to ensure the best possible ride, performance, and durability for all our customers.


	Google Search Search Spyder-Net
-